- No products in the cart.
- No products in the cart.
UK MADE
MADE TO MEASURE
FAST LEAD TIMES
PEFC REGISTERED
DELIVERY DAYS TO SUIT YOU
Description
Staircases can be made up of straight flights or winding steps – our Winder Tread Pack is used for cladding the ‘Kite Shaped’ steps on your staircase. Most newer homes are fitted with softwood or MDF stairs, and the cost and mess involved in replacing them can be off putting. Therefore, Heritage Oak Stair Cladding offers you a simple cost-effective solution. By retaining your existing stairs, and bonding new oak treads and risers over the top, converting your staircase to solid oak becomes an easy weekend DIY job. Better yet, the cost of our oak stair cladding is usually a fraction that of a new oak staircase.
Winder Tread Pack Contents and Sizes
This winder tread pack is designed to clad a single winder step. Most winders come in sets of 3 and you will need 3 winder packs to clad a full set. The pack will clad any winder step up to 1200mm wide, 570mm deep, and up to 200mm high.
We designed the tread packs so you can cut any of the parts in the kit down to suit your individual step shape. This allows full flexibility with our packs and endless options to suit even the most unique stairs.
This pack contains:
- 4 piece tread, 14mm solid oak with T&G jointing. Two longer sections for the front, and two shorter for the rear of the tread
- Oak riser moulding
- Oak veneered riser board
You will need 1 winder tread pack per ‘kite shaped’ step you have on your flight. If you have 12 or 13 steps, our handy kit may be a better alternative! The pieces will just need to be cut to suit your specific measurements once received. The treads and mouldings are all solid oak, so trimming these will not be a problem!
Winder Tread Pack Manufacture
Our oak winder tread packs as part of our stair cladding range, are manufactured in our UK based factory. Treads and mouldings are machined from a prime grade oak sourced from France. This timber is solid oak and so can be cut down on site to the measurements you require.
Images are available to view on our Facebook page.
Additional information
| Weight | 5.4 kg |
|---|---|
| Dimensions | 100 × 15 × 20 cm |
Timber Grades
Made from selected pieces of oak with less knots than our rustic grade. Some pieces will be clear whilst others will have some knots.
The riser board is made from a A grade oak veneer bonded to an MDF 6mm base.
Standard and Custom Sizes
Stair cladding is designed to fit stairs with straight treads up to 1000mm wide when measured between the strings. Winder tread packs are wider as the winder treads run at angle and are therefore wider. The pack will clad winder steps up to 1200mm wide.
Tread depths (know as the "go" of the tread) of up to 570mm can be accommodated. Often even deeper treads can be clad, as the rear most board is often cut to a very short length and the offcut can be added to the rear. In the unlikely event you had an even deeper winder step, then the separately available extension board can be used to add 142mm.
Step heights (know as the "rise" of the step) of up to 200mm can be accommodated
All of these dimensions are well above what is normal for UK stairs.
Finishing
Oak stair cladding is supplied unfinished to allow you to match into your existing decor. We can supply finishes from our flooring finishing range if desired.
Delivery
We use multiple couriers to ensure your item is delivered safely and efficiently, lead times are as below
Please note, anything to Scotland, Cornwall, or the South Coast can take up to 4 weeks in transit. Please call us for an approximate lead time as time will be dependent on the quantity of items you purchase
Handling Time
1-3 Working Days
Transit Time
3-5 Working Days
We do not currently deliver to Scottish Highlands, Islands, or Ireland
Please give us a call if you are needing your order urgently, express options may be available on a case by case basis
You must be logged in to post a review.
Winder Tread Pack
£116.16 Incl. VAT
SKU: HDFWTO
Wood stair tread and riser kits are hugely popular, with the natural subtle tones of oak treads adding a real wow factor to your home. Our simple tread stair refacing kits are the most cost effective ways to achieve an oak staircase. Keep your existing stairs and simply bond new oak treads and risers over the top of the existing ones!
This kit is designed to clad a winder step, the shaped tread found in sets of 3 that turn a staircase through 90 degrees. This kit contains the parts required to clad one step so typically 3 will be needed or have a look at our winder stair kits.
Our stair cladding kits are made in Britain, come with free delivery and are in stock now.
Request a Sample
If you would like a sample for your project please click below.
Related products
Straight Tread Pack
£65.34 Incl. VATBullnose Tread Pack
£198.20 Incl. VATSolid Oak Stair Cladding Kit – 13 Tread Winder Flight
£926.42 Incl. VAT Per tread price £71.26Essentials Straight Tread Pack – Modern
£52.79 – £642.40 Incl. VAT
Reviews
There are no reviews yet.