The 2XG External Oak Door is ideal for letting light into those darker areas of your property. These oak doors are ideal in both the modern property and the period property.
Here at Heritage, we manufacture doors to a 44mm thickness for a solid heavy door. We make the stiles and rails by laminating together two 22mm sections of solid oak. Laminating the sections in this way makes the door much more structurally stable than using a single piece of oak. We do all laminations in house so that we can control the quality. Our specialist staff use twin dowel joints, which we wedge and hydraulically press to make the mainframe of the door.
We can supply the door can unglazed to allow you to add your choice of glazing on site. Our accurate machine rebates the door to suit up to 18mm thick sealed unit double glazing, and we supply solid oak glazing beads with the door. Our staff then make the lower panel with an oak veneer cross laminated panel for superb stability and weather resistance.
We make doors with correctly angled beads and scribed joints to meet the criteria set by BS644.
We handcraft all of our exterior 44mm doors to each order. The typical lead time is around 3-4 weeks on these oak external doors.
Points to Note
- We recommend that these doors are fitted under a porch if your property is highly exposed to the elements (i.e. seafront properties)
- We will only guarantee this door IF you choose to have the door factory finished by us. Selecting unfinished will mean we are unable to assist with doors that are warped, twisted, etc. due to moisture ingress unless a 3 stage end grain sealer system has been proven to be used. A care leaflet will be provided with every door detailing the best way for the doors to be finished.
- We make the doors from solid oak, however we cross laminate the flat panels used with an oak veneer. The cross lamination is to ensure the door is more stable and has much more reduced risks of movement than a door made with 100% solid oak. Please contact our sales team for further details.
Need a frame? Try our door set version!
We manufacture exterior 2XG doors using a specially selected grade of oak. The oak is bought directly from a number of partner sawmill in central and northern France where the best quality slower grown oak is found.
Most boards will be clear, some may have the occasional small knot emphasising the solid oak construction of these doors. There can be some colour variation within the boards as you find in any natural raw material.
All of our Oak is specially kiln dried to 8-10% for use as an exterior door and will exhibit minimum movement in use. As with all timber its extremely important to thoroughly finished external doors as soon as they are installed to prevent rapid moisture content changes that can lead to door swelling.
Standard and Custom Sizes
2XG external oak doors are manufactured to order to your exact size. We will make your door in any size up to 950mm x 2100mm for the same price. We can make larger doors but please call with your requirements for us to quote a price.
All the doors are made to a standard 44mm thick using laminated oak stiles and rails. To manufacture these we laminate 2 x 22mm oak sections in house.
We strongly recommend you specify the door a few mm oversize, and plane the door on site to suit unless you are absolutely sure that the door frame is 100% square. They rarely are! Your new oak door is custom made, and cannot be returned/refunded once manufactured so please consider these measurements carefully. We will confirm them back to you once you have let us know in an order confirmation so we both have a clear understanding of the size required
Please note that your new door is hand made and will take around 2-3 weeks to manufacture.
Oak is a very popular and attractive timber, but it needs very careful finishing to ensure satisfactory service. We strongly recommend you consider our factory finishing option.
If you choose this option your door will go through a multi stage finishing system. Your door will first be sanded and degreased. After any chosen colour stain is applied, a special sealer is used to protect porous end grain. Following this multiple top coats are applied to a specified thickness. We use a specially designed highly thixotropic finish, applied by a very high pressure spray system, that allows us to build up a highly protective layer on your door. V joint sealer is applied where required between top coats, and the door is infrared cured and sanded between each coat.
This system provides your door with the best protection possible from the weather as well as creating a finish that looks much better than a brush applied finish.
If you choose to have your door unfinished, when you receive the door it should be checked for fit. We cannot overstate how important it is to properly finish timber external doors to provide satisfactory service. All timber will expand and contract as it gains and loses moisture. That's why your door can take on moisture and expand in winter weather. Thoroughly finishing the door will slow this movement to a minimum. It is extremely common to find timber doors that have not been finished properly, almost always in difficult to reach places such as underneath the door. If you prefer to finish your door onsite, each door is shipped with detailed finishing instructions (see download tab to view a copy) that explain how to create a weathertight finish to your door. You must follow these carefully to ensure satisfactory performance.
Even with thorough and correctly specified finishing, timber doors can occasionally require minor planing in the first couple of seasons. You should always follow a good maintenance programme with solid oak exterior doors, refinishing them as necessary.
Oak can discolour over time unless UV protection is given to it within the finishing system. This protection is within the pigment, and therefore it is not possible to give proper UV protection with a clear finish. As standard we recommend a medium oak finish. We can apply a clear finish however you should note that this cannot provide UV protection and your oak door may weather and the timber fade over time if this option is chosen.
We specify and use Teknos water based industrial finishes in our factory finishing facility.
PLEASE NOTE - Prefinished doors are hung in our spray facility to ensure full coverage and a top quality finish. This does mean there will be 2 small screw holes in the side of your door. Please be aware of this before ordering.
We use multiple couriers to ensure your door is delivered safely and efficiently, lead times are as below
Please note, anything to Scotland, Cornwall, or the South Coast can take up to 4 weeks in transit. Please call us for an approximate lead time as time will be dependent on the quantity of doors you purchase
10-15 Working Days
Please add 5 working days for prefinishing/glass
3-5 Working Days
We do not currently deliver to Scottish Highlands, Islands, or Ireland