- No products in the cart.
- No products in the cart.
UK MADE
MADE TO MEASURE
FAST LEAD TIMES
PEFC REGISTERED
DELIVERY DAYS TO SUIT YOU
Description
These traditional oak frame ledge and brace doors look superb when installed. The classic design and heavyweight quality make a sturdy and attractive door for your home.
Oak Frame Ledge and Brace Door Timber
Doors are manufactured in a select grade of oak. Most of the door will be clear, with the occasional small knot emphasizing the solid oak construction of these doors. All of our Oak is specially kiln dried to 8-10% for use indoors. These are perfect for older properties due to the character in the oak.
Oak Frame Ledge and Brace Door Construction
- The frames are made from 2 laminated solid oak 20mm sections
- Hydraulically press assembled on state of the art machinery
- 40mm Door Thickness
- Tongue and groove boards
Benefits
- Strong, Long Lasting Door
- Great Stability
- Made in the UK
Using this door on a sliding track
Using this door as a slider? No problem! Check out our sliding track. Suitable for single doors up to 44mm thick!
Hardware Fitting Service
Check out our prefitted hardware range from Carlisle Brass! Here at Heritage, your hinges and latch will be prefitted to the oak half glazed door before dispatch, saving you lots of time and effort on site. Your handle will be shipped loose for safety in transit. As standard, the latch will be fitted 990mm up from the bottom of the door. Please get in touch with us if you would like a bespoke measurement.
Each Pack Contains:
1 x Latch, Latch and Deadbolt or Bathroom Lock
3 x Satin Stainless Steel Ball Bearing Hinges
Which Handle Goes With Each Latch/Lock?
- Latch – Any Lever on Rose Handle, or a Lever on Backplate Latch Handle
- Latch and Deadbolt – Any Lever on Rose Handle
- Bathroom Lock – Lever on Rose Handle or Lever on Backplate Bathroom Handle
Prefer loose hardware? Check out our hardware range!
Additional information
| Weight | 40 kg |
|---|---|
| Dimensions | 210 × 95 × 4 cm |
| Door Finish | Oak |
| Door Configuration | Single Door |
| Door Type | Solid Oak |
Timber Grades
We manufacture Framed Ledged Doors using a specially selected grade of oak. The oak is bought directly from a number of partner sawmill in central and northern France where the best quality slower grown oak is found.
Most boards will be clear, some may have the occasional small knot emphasising the solid oak construction of these doors. There can be some colour variation within the boards as you find in any natural raw material.
All of our Oak is specially kiln dried to 8-10% for use indoors and will exhibit minimum movement in use. As with all timber its important to thoroughly finished the doors as soon as they are installed to prevent rapid moisture content changes.
Standard and Custom Sizes
The FLR oak doors are available in the following sizes: -
2'0'' x 6'6''
2'3'' x 6'6''
2'6'' x 6'6''
2'9'' x 6'6''
We also make these oak doors in custom sizes should you require this service. Once you have select either oversized or undersized on the drop down option, you can give us the sizes you require in the basket. For doors over 2'9 x 6'6 (838mm x 1981mm) in EITHER dimension, please select "custom oversize", for doors under both these dimensions please select "custom undersize. . We will make your door in any size up to 950mm x 2100mm for the same price. We can make larger doors but please call with your requirements.
Finishing
We can also pre-finish your door for you if you prefer. If you select this option, we will apply the finish of your choice in our brand new spray facility. This produces a finish that is superior to what is practical to achieve using DIY methods. Each door is carefully sanded then has two spray coats applied. The result is a smooth finish that still allows all the beauty of the timber grain to shine through.
Please note that a prefinished door is considered a customised door and cannot be returned. If you are unsure about the finish you prefer then we recommend ordering a sample or ordering your door unfinished for on-site finishing.Please note - to fit into our spray facility, the door is hung onto an overhead track meaning the door will contain two small screw holes on the side of the door. Please be aware of this before ordering.
Choose From:
Clear
Light Oak
Medium Oak
Dark Oak
You must be logged in to post a review.
Solid Oak Frame Ledge and Brace Internal Door ‘X’ Design
From: £643.23 Incl. VAT
SKU: FLRXBRACEFIT
These traditional solid oak frame ledge and brace doors look superb when installed. The classic design and heavyweight quality make a sturdy and attractive door for your home.
Need a more bespoke approach?
Request a Quote
You may also like…
Solid Oak Frame and Ledge Internal Stable Door
From: £554.10 Incl. VAT
Related products
Solid Oak Bead and Butt Ledged Sliding Door
From: £258.96 Incl. VATSolid Oak Frame and Ledge Internal Door
From: £551.54 Incl. VATSolid Oak V Grooved Ledged Sliding Door
From: £258.96 Incl. VATSolid Pine Frame and Ledge Internal Door
From: £158.57 Incl. VAT
Reviews
There are no reviews yet.