This is a universal fit oak double door frame designed to suit much wider, or double doors. Therefore, the frame will fit any door or door pair up to 2060mm high x 2000mm wide x 50mm deep. Note this is the door size, not the opening size.
We make the oak double door frame in the UK using generous section sizes of a prime grade of oak. They are a perfect way to install a good quality solid oak door. The timber will be mostly clear with the occasional knot. Then, when sealed will provide a fabulous quality long lasting door frame.
All you will need to do is finish your door frame with frame fixings suited to your wall construction. You will also need a threshold seal of your choice such as a Stormguard. We supply the door frames unfinished so you can pre-finish to your desired colour on-site and come complete with a sealing strip to fit into the loose stop lats.
Each kit contains;
Cill – 40 x 130 x 2100 – 1no (2 part laminated from solid oak sections), machined with a drip groove to the underside
Frame Legs – 40 x 100 x 2100 x 2no (2 part laminated from solid oak sections)
Frame Head – 40 x 100 x 2100 – 1no (2 part laminated from solid oak sections)
Stops Lats for Legs – 40 x 20 x 2100 – 2no (grooved to accept supplied weather stripping)
Stops Lat for Head – 40 x 20 x 2100 – 1no (grooved to accept supplied weather stripping)
Weatherstripping 3 x 2100
The frames are made using a high grade of oak. The timber will be mostly clear with the occasional knot which serves to highlight the solid oak nature of your new door frame.
Sills and the frame sections are made using 2 piece laminated oak. Laminated oak is much stronger and helps to keep the frame straight in the harsh external environment. We laminate all of our oak in house so that we can control the quality of the process
Standard and Custom Sizes
The Double Door Kit Contains: -
Cill: 40 x 130 x 2100 - 1no (2 part laminated from solid oak sections), machined with drip groove to underside
Frame Legs: 40 x 100 x 2100 x 2no (2 part laminated from solid oak sections)
Frame Head: 40 x 100 x 2100 ? 1no (2 part laminated from solid oak sections)
Stops Lats: 40 x 20 x 2100 - 3no (grooved to accept supplied weather stripping)
Weather stripping for stop lats: 3 x 2100
All external door frames are supplied unfinished. They are machined to a smooth surface finish and supplied bare ready for you to prefinish on site.
When oak is machined you can sometimes get slight lifting of the grain in small areas, particlarly where the grain varies such as around knots. This can be easily sanded smooth prior to applying a finish and is normal for this timber.
These item's are carefully packaged before being shipped with a national courier. For smaller orders, each frame is wrapped in a sturdy cardboard and shipped individually. Larger orders will be palletised