Mon - Thur: 08:30 to 17.00 Fri: 08:30 to 16:30

Products

The Heritage Collection / Winder Tread Pack

Request a Sample

If you would like a sample for your project please click below.

Request a Sample

Winder Tread Pack

£89.95 Incl. VAT

Oak stairs are hugely popular, with the natural subtle tones of oak treads adding a real wow factor to your home.

Oak stair cladding is the most cost effective way to achieve an oak staircase.  Keep your existing stairs and simply bond new oak treads and risers over the top of the existing ones

This kit is designed to clad a winder step, the shaped tread found in sets of 3 that turn a staircase through 90 degrees.  This kit contains the parts required to clad one step so typically 3 will be needed or have a look at our winder stair kits.

SKU: HDFWPO Category:

Description

Most newer homes are fitted with softwood or MDF stairs, and the cost and mess involved in replacing them can be offputting.

Heritage oak stair cladding offers you a simple cost effective solution. By retaining your existing stairs, and bonding new oak treads and risers over the top, converting your staircase to solid oak becomes an easy weekend DIY job and better yet the cost is usually a fraction that of a new oak staircase.

This pack is designed to clad a single winder step.  Most winders come in sets of 3 and you will need 3 winder packs to clad a full set.  The pack will clad any winder step up to 1200mm wide, 570mm deep and up to 200mm high.  The tread is designed to be trimmed to suit any of the three winder shapes seen in a typical set of 3 winders.

Pack contents:

4 piece tread, 14mm solid oak with T&G jointing.  Two longer sections for the front, and two shorter for the rear of the tread.

Oak riser moulding

Oak veneered riser board

Additional information

Weight 5.4 kg
Dimensions 100 × 15 × 20 cm

Timber Grades

Stair cladding is made using a specially selected prime grade of French oak. Most pieces will be clear, with the occasional small knot which helps to emphasise the solid oak nature of the product

The riser board is made from a A grade oak veneer bonded to an MDF 6mm base

Standard and Custom Sizes

Stair cladding is designed to fit stairs with straight treads up to 1000mm wide when measured between the strings. Winder tread packs are wider as the winder treads run at angle and are therefore wider. The pack will clad winder steps up to 1200mm wide.

Tread depths (know as the "go" of the tread) of up to 570mm can be accommodated. Often even deeper treads can be clad, as the rear most board is often cut to a very short length and the offcut can be added to the rear. In the unlikely event you had an even deeper winder step, then the separately available extension board can be used to add 142mm.

Step heights (know as the "rise" of the step) of up to 200mm can be accommodated

All of these dimensions are well above what is normal for UK stairs.

Finishing

Oak stair cladding is supplied unfinished to allow you to match into your existing decor. We can supply finishes from our flooring finishing range if desired.

Downloads

Delivery

If bought in isolation, this tread would ship with a parcel courier. If purchased as part of a full staircase order then this will normally be shipped on a pallet.

The pallet carrier specifies the delivery as "kerbside" meaning they will unload from the truck only. You will need to be on hand to help move the goods indoors. Individual treads are easy to carry once the pallet is unpacked.

Reviews

There are no reviews yet.

Be the first to review “Winder Tread Pack”