Opening Hours Mon - Thur: 08:30 to 17.00 Fri: 08:30 to 16:30


The Heritage Collection / 13 Tread Winder Flight

Request a Sample

If you would like a sample for your project please click below.

Request a Sample

13 Tread Winder Flight

£692.99 Incl. VAT

Oak stair cladding is the most cost effective way to achieve an oak staircase.  Keep your existing stairs and simply bond new oak treads and risers over the top of the existing ones

Cladding kits offer even better value.  This kit contains all the parts you need to complete a winder staircase with 13 treads, and also includes an adhesive kit to ensure a quality installation



Oak stairs are hugely popular, with the natural subtle tones of oak treads adding a real wow factor to your home. However, builders tend to fit most newer homes with softwood or MDF stairs. The cost and mess involved in replacing them can be offputting. Luckily, we have our 13 Tread Winder Flight to help with this.

Heritage oak stair cladding offers you a simple cost effective solution. By retaining your existing stairs, and bonding new oak treads and risers over the top, converting your staircase to solid oak becomes an easy weekend DIY job and better yet the cost is usually a fraction that of a new oak staircase.

Heritage has designed this 13 Tread kit for a winder staircase with 13 risers, 3 of which are winders.  This is one of the most common stairs in the UK and is seen in most post war 3 Bed Semi style homes.  The kit contains 10 straight tread packs and 3 winder tread packs.  It also contains an adhesive fixing kit.  The kit will fit any stairs with straight treads up to 1000mm wide, 285mm deep individual treads (go) and up to 200mm individual height (rise).  The winder packs are made wider to allow for the winder treads being wider than the straight treads.  It dpesn’t matter where on the stairs the 3 winder treads are, although they are typically close to the top.

Kit contents:

10 x Straight Tread Packs

3 x Winder Tread Packs

1 x Cladding Fixing Kit (4 x tubes of Adhesive)

Additional information

Weight72 kg
Dimensions1200 × 1000 × 50 cm

Timber Grades

Stair cladding is made using a specially selected prime grade of French oak. Most pieces will be clear, with the occasional small knot which helps to emphasise the solid oak nature of the product

The riser board is made from a A grade oak veneer bonded to an MDF 6mm base

Standard and Custom Sizes

Stair cladding is designed to fit stairs with straight treads up to 1000mm wide when measured between the strings.

Tread depths (know as the "go" of the tread) of up to 285mm can be accommodated

Step heights (know as the "rise" of the step) of up to 200mm can be accommodated

All of these dimensions are well above what is normal for UK stairs. A typical UK staircase will have a width of around 840mm between treads, a rise of around 180mm and a going of around 220mm.


Oak stair cladding is supplied unfinished to allow you to match into your existing decor. We can supply finishes from our flooring finishing range if desired.



Stair cladding kits are normally delivered on a pallet. The pallet carrier specifies the delivery as "kerbside" meaning they will unload from the truck only. You will need to be on hand to help move the goods indoors. Individual treads are easy to carry once the pallet is unpacked.


There are no reviews yet.

Be the first to review “13 Tread Winder Flight”