Oak Framed Ledged and Braced stable doors are a great way to allow you to separate an area of the house without shutting it off completely. Each leaf of the door is a full mortice and tenon frame for a superb quality long-lasting door.
Doors are manufactured in a select grade of oak. Most boards will be clear, with the occasional small knot emphasizing the solid oak construction of these doors. All of our Oak is specially kiln dried to 8-10% for use indoors.
We laminate 2 solid sections of oak for the frames, which are then hydraulically press assembled on state of the art machinery to ensure a strong long-lasting door, with good stability provided by the 2 part laminated frame. Framed & ledged stable doors are available in either a bead & butt option or a V Grooved profile.
You can add different options to your doors, such as a glass opening or a bracing pack to add in diagonal braces. Please see the options tab for more information. We can also finish your doors, you are welcome to pick from a range of colours.
All our internal oak framed ledged and braced stable doors are handcrafted to order. The typical lead time is around 1-2 weeks.
We manufacture Framed Ledged Doors using a specially selected grade of oak. The oak is bought directly from a number of partner sawmill in central and northern France where the best quality slower grown oak is found.
Most boards will be clear, some may have the occasional small knot emphasising the solid oak construction of these doors. There can be some colour variation within the boards as you find in any natural raw material.
All of our Oak is specially kiln dried to 8-10% for use indoors and will exhibit minimum movement in use. As with all timber its important to thoroughly finished the doors as soon as they are installed to prevent rapid moisture content changes.
Standard and Custom Sizes
The FLR oak stable doors are available in the following sizes: -
2'0'' x 6'6''
2'3'' x 6'6''
2'6'' x 6'6''
2'9'' x 6'6''
We also make these oak stable doors in custom sizes should you require this service. Once you have select either oversized or undersized on the drop down option, you can give us the sizes you require in the basket. Please note that custom doors will take around a week to manufacture. For doors over 2'9 x 6'6 (838mm x 1981mm) in EITHER dimension, please select "custom oversize", for doors under both these dimensions please select "custom undersize. We will make your door in any size up to 950mm x 2100mm for the same price. We can make larger doors but please call with your requirements.
All the doors are made to a standard 40mm thickness. Both upper and lower frames are laminated from two 20mm sections. We complete this lamination process in house so that we have total control of quality. Laminating the frames in this way, whilst time consuming, creates a much stronger door that is much more resistant to warping. The central boards are pinned in place and are 20mm thick tongue and grooved for exceptional strength
We can also pre-finish your door for you if you prefer. If you select this option, we will hand apply the finish of your choice from our wide range. All of our finishes use a hard wax oil top coat, which creates a wonderful subtle finish to the oak whilst protecting the timber. We can finish your new Framed Ledged door in a Traditional Clear hard wax oil or you can choose from one of our colour tones.
Please note that a prefinished door is considered a customized door and cannot be returned. If you are unsure about the finish you prefer then we recommend ordering a sample or ordering your door unfinished for on-site finishing.
Doors are carefully packaged before being shipped with a national courier. For smaller orders, each door is wrapped in a sturdy cardboard carton and shipped individually. Larger orders (typically 12-15 doors+ will be palletised)