Introducing our brand new Angled Oak Mexicano Custom Sized Engineered Door service. This door is also often referred to as a Suffolk door.
Heritage is the only company in the UK manufacturing custom-sized engineered oak doors.
Until now all engineered oak doors have been manufactured in the far east and therefore if you needed a custom size then these had to be ordered specially. They take a minimum of 14-16 weeks to arrive, and regularly much longer. We regularly hear of these orders then arriving with issues such as wrong sizes or damage, with any replacement another 16 weeks away!
Heritage has built a CNC production facility in Sheffield especially to manufacture popular engineered door styles in custom sizes in the UK. This means that we can offer these doors in 1-2 weeks, and you know you are dealing directly with a UK manufacturer. We do not buy standard doors and modify them. Every door is made from scratch.
Angled Oak Mexicano Custom Door Sizing
We aim to keep our service offer simple yet effective. These doors are offered in 3 size brackets and prices. This way you do not have to wait for a quote, simply order your door in the correct bracket then let us know the size you need.
We do any size up to:
750 x 2050mm (total outer dimension)
850 x 1400mm (total outer dimension)
1050 x 2150mm (total outer dimension)
For help measuring up, check out our step by step guide
Please be aware we cannot make these doors any smaller than 350mm wide
As well as the width you will need to supply us with the height of each side of your door at checkout so that we accurately design your door. If you need a door with a part angled top then we also need to know the width of the flat section. A drawing with full dimensions will be emailed over to you after your order has placed. Once you confirm the dimensions are what you need the design is transferred into our CNC manufacturing equipment and your door is produced.
Our Mexicano doors are supplied at a standard 35mm thick. The doors are made as an engineered door with a white oak veneer over a hardwood core.
This door is manufactured with separate stiles and rails, each having twin 16mm dowels to each joint for strength. The door has the grooved routed into a central slab which is cross-laminated to ensure the door remains resistant to bowing.
These details are similar to the standard far eastern manufactured door, although you won’t find chipboard in the centre of our doors as you would with far eastern doors.
How close are these to standard Mexicanos that I can buy from any outlet?
There are probably 15-20 versions of the Mexicano imported and on sale in the UK, each with slight variations in design. The most obvious design difference is in the width of the stiles and rails. Bottom rails for example range from 130mm to 200mm wide.
For no extra cost, we can vary the construction of your door to help match into existing doors. You can specify any width stile (the vertical sides of the door) between 100-130mm and any width bottom rail from 100-200mm. We can make your top rail anywhere between 100-130mm. (Please note the maximum sizes in each price bracket assume you use the maximum widths to the stiles and rails. For example, a 910mm wide door would need us to use 130mm wide stiles to drop into the lower price bracket. Please call if you need further information on this)
The grooves on our Mexicanos are based on the better quality doors in the market which tend to have deeper and slightly wider grooves. We make each groove 10mm wide x 8mm deep.
For standard size doors, it makes sense to use imported mass-produced doors as these are cheaper, using custom-sized doors for those occasions where a standard door just won’t fit. We can advise which standard doors are an exact match to our custom doors and can also supply these doors as part of larger orders.
Why is this door a ‘Deluxe’ door?
We offer custom sized Mexicanos in 2 styles. This door is a little more expensive than our base Mexicano as we manufacture them to be an exact replica of a standard Mexicanos. Most manufacturers traditionally made with separate rails and stiles with a central grooved panel. We also offer a base Mexicano for those looking for a better price, our operatives make this from a single slab (see our other listings for details).
We make your custom-engineered Mexicano door here in Sheffield. We offer a 2-week lead-time, although in many cases we will supply them sooner.
Benefits of Oak Angled Mexicano Custom Doors
Angled Mexicanos in most cases are not available from the far east. Buying your custom doors from Heritage means that you get them quickly. You are using a UK company so any issues that do occur such as shipping damage can be resolved.
Oak Angled Mexicano Standard & Custom Sizes
- 750 x 2050mm
- 850 x 1400mm
- 1050 x 2150mm
Please enter your size in the ‘notes’ box at checkout. Where you need standard sized doors it makes sense to buy the imported doors and we can offer these doors alongside our custom Mexicanos.
Check out our prefitted hardware range from Carlisle Brass! Here at Heritage, your hinges and latch will be prefitted to the door before dispatch, saving you lots of time and effort on site. Your handle will be shipped loose for safety in transit. As standard, the latch will be fitted 990mm up from the bottom of the door. Please get in touch with us if you would like a bespoke measurement.
Each Pack Contains:
1 x Handle Pair
1 x Latch
1 x Strike and Fixing Pack
3 x Ball Bearing Hinges
Choose the privacy option to receive an additional:
1 x Deadbolt Lock
1 x Strike and Fixing Pack for Deadbolt
1 x Thumb Turn to match handle