Opening Hours Mon - Thur: 08:30 to 17.00 Fri: 08:30 to 16:30


The Heritage Collection / Oak 44mm Stafford Doorset & Frame

Oak 44mm Stafford Doorset & Frame

From: £1,740.18 Incl. VAT

Oak 44mm Stafford Doorsets are a hugely popular design, and this 44mm custom sized doorset is a great option.  Fully finished, prehung and ready to install.

Complete with custom made door frame and all hardware prefitted in a wide range of choices.  The entire doorset is then factory finished in a state of the art spray booth.  Installation time is reduced to a minimum significantly reducing your onsite costs.  44mm doorsets are a great choice for cost effective quality and rapid installation.

The doors come with a wide range of features, including adjustable hinges and insurance approved hardware.   Choose from either a handle style or a nightlatch style lock.

After you have placed your order please enter your custom size measurements in the more information box on the checkout page.

Please select your configuration below:

SKU: MEX-56EXT Category:


Oak Stafford style doors are a hugely popular option for both period properties.   This 44mm oak custom sized doorset is a great choice for the homeowners looking for a stylish door backed up with quality British manufacturing.  Fully finished and ready to fit, doorsets also save much time on site both fitting and finishing and can be a very cost effective option.  Choose from either a high level nightlatch style system or a traditional lever handle.

Prior to your doorset being manufactured we will send you a fully dimensioned drawing for you to check.

Doorset Specification

Each doorset is hinged into a quality solid oak doorframe, with 3 adjustable hinges to allow you to fine tune the door for a perfect fit.  The frame comes complete with a cill, aluminium threshold seal and weatherstripping.

Choose from either a nightlatch style lock or a 5 lever mortice lock with your choice of handle.

Where a nightlatch is specified, this is an insurance approved ERA nightlatch to BS3621 and your door will also be fitted with a seperate deadbolt, fitted with a Euro cylinder.  Key operation to the outside with inner thumbturn.  This ensures that Part Q building regulation as well as insurance requirements are met.

Lever handle doorsets feature a 5 lever mortice sashlock manufactured to BS3621 standards with built in mortice lock

Your doorset will be fully factory finished in a choice of colours using a state of the art facility to apply a multistage finish system including end grain sealers for great weather performance.

Oak 44mm Stafford Doorset Specification

Here at Heritage, we manufacture this door with a full 44mm solid oak frame with an 36mm cross laminated inner oak panels.  Our state of the art 5 axis machining centre (equipped with the latest tooling) accurately machines each component. This allows us to to produce an exceptional quality door made to BS644 standards.

The centre boards are made from a single 36mm thick hardwood oak veneered panel, sealed into the outer frame for excellent weather resistance.  V joints are machined into the face to create the look of a panelled door without the potential water ingress issues of using seperate panels.   To meet British Standards on door construction, we use custom designed tooling to create a slightly rounded “V” style joint.  This method means we can apply finishes to the correctly specified thickness, which would be impossible with sharp edges.

We use twin 16mm hardwood dowel joints, which are glued and hydraulically clamped to make the mainframe of the door.  This is a modern method that results in a strong and accurate construction and means you can be sure your door is made to last.

We handcraft all of our external 44mm doors to each order. The typical lead time is around 3-4 weeks on these oak external doors.  Each door is made to your exact requirements and we can manufacture these doors up to a total brickwork opening size of 2200 x 1000.  If you need a door even larger than this size then please call for a quote.

Timber Grades

All of our 44mm external doorsets are made from superb quality, prime grade timber.

Major 44mm sections are made from 2 part laminated prime oak for excellent stability. Central panels are often cross laminated again for additional stability. The door frame measures 88 x 56 and is typically laminated from 3 solid oak sections.

Standard and Custom Sizes

All doorsets are made to your exact requirements. We will need to know the brickwork opening size into which the frame will be fitted.

We can make this door set to any opening size up to 1000mm wide x 2200mm high. Please give us your opening size at checkout. If you need a larger door then we can manufacture this but would need to quote seperately.


External doorsets are finished using a full multistage system including end grain sealers. This provides the maximum level of protection needed against harsh weather conditions.

All coats are applied using a Wagner Aircoat system and IR cured in a controlled environment. In addition the door is prefinished in a partly disassembled state and thus can be finished much more thoroughly than on site finishing. The system uses three separate coats, with all end grain treated with a special sealer to restrict moisture ingress.



We use multiple couriers to ensure your door is delivered safely and efficiently, lead times are as below

Please note, anything to Scotland, Cornwall, or the South Coast can take up to 4 weeks in transit. Please call us for an approximate lead time as time will be dependent on the quantity of doors you purchase

Handling Time
15-20 Working Days
Please add 5 working days for prefinishing/glass

Transit Time
5-10 Working Days
We do not currently deliver to Scottish Highlands, Islands, or Ireland

Please give us a call if you are needing your order urgently, express options may be available on a case by case basis


There are no reviews yet.

Be the first to review “Oak 44mm Stafford Doorset & Frame”