Mon - Thur: 08:30 to 17.00 Fri: 08:30 to 16:30


The Heritage Collection / Pine Ledged External Doors

Request a Quote

If you would like a personal quote for your project please click below.

Request a Quote

Pine Ledged External Doors

£126.00£138.60 Incl. VAT

These beautiful solid pine ledged doors are made from a good grade of Scandinavian pine and feature a subtle V groove style profile board.

These pine doors are made to a proper external specification with sealed joints and are great for varnishing or painting to to create a cost effective exterior door for your outbuilding or garage although we wouldn’t normally recommend them as a main door for your house.

Every door is handmade to your exact size requirements, so you can install them quickly with no trimming on site.

SKU: DIEVG-C-1-1 Category:


Pine ledged external doors are a great option for outbuildings and garages where where a simple cost effective door is required.  Heritage pine ledged doors are made to the same high quality standards as our oak ledged doors, and we believe that they are by far the best quality pine ledge doors on the market.

Each external pine door features sealing strips assembled between the vertical boards to provide a good level of watertightness.  Doors should be finished with a good quality exterior grade paint system.

Every door is custom made to your size requirements.  Simply pick the size bracket from the drop down box then let us know your exact size requirements.  If the door is under 838mm wide x 1981mm high, then pick Custom Undersize.  If either dimension is over then please choose Custom Oversize.  We’ll make an oversize door up to 950mm wide x 2100mm high for the same price.  If you need an even larger door, then please call us for a quote

All of our pine doors are handmade in our factory in Sheffield using a Vths grade of redwood (pine) sourced exclusively from northern Scandinavian mills to ensure we use slower grown pine for better stability.  We start with wider 5″ raw material to make the vertical boards and ledges, unlike the doors made with 4″ material that are normally found on the market.  This makes for a much better looking and stronger door.

Every door is handmade and checked prior to despatch.  Ledges are glued, pinned and then hydraulically pressed on, just like on our oak doors.   We do not simply staple the doors together as you will see on most mass market pine ledged doors.  This process makes our door by far the strongest and most durable available in the UK.

Additional information

Weight 25 kg
Dimensions 210 × 95 × 4.4 cm
Door Size

Custom Under 2 9" x 6 6" / 838mm x 1981, Custom Over 2 9" x 6 6" / 838mm x 1981

Timber Grades

All Heritage pine ledged doors are manufactured using Scandinavian Vths redwood. Timber is sourced from northern Swedish and Finnish mills, typically in the northern 3rd of the Gulf of Bothnia. This ensures that we are only using pine from these colder northern regions which makes for a slower grown, denser timber with smaller knots. This helps to keep the door more stable in use.

We typically use 5" wide raw material in our pine ledged doors, rather than the more common and cheaper 4" wide pine. This makes for a much better looking more robust door. We've designed and sold this door as a good quality pine ledged door.

We also manufacture the door with 20mm thick verticals. Most cheaper doors on the market use 15mm thick verticals. Again this helps add to the robust nature of the door.

Standard and Custom Sizes

These pine doors are available in the following sizes: -

2'0'' x 6'6''/610mm x 1981mm

2'3'' x 6'6''/686mm x 1981mm

2'6'' x 6'6''/762mm x 1981mm

2'9'' x 6'6''/838mm x 1981mm

All the doors are made to a standard 40mm thick.

Custom Sizes

We can also make these oak doors in custom sizes should you require this service. Once you have select either oversized or undersized on the drop down option, you can give us the sizes you require in the basket.

Custom Undersize - Doors under 2'9'' x 6'6'' in BOTH dimensions

Custom Oversize - Doors over 2'9'' x 6'6'' in EITHER dimension

Please note that custom doors will take around a week to manufacture.



We also offer our own superb ironmongery sets, made in hand forged steel and available in either an antiqued beeswax or a pewter finish.

Each kit contains 2 x 18" (450mm) strap hinges, specially designed with strengthened hinge assemblies to avoid sagging. The kit also contains a substantial thumblatch complete with locking pin. Finally a set of matching screws is also supplied.

Bracing Pack

Selecting a bracing pack adds the diagonal braces to your door. In cheaper doors these are necessary to stop the door from sagging over time, but with the heavier sections and the proper glued, pinned and pressed assembly used in Heritage doors this is not the case. Braces are now purely an aesthetic choice.

Braces are available as either a loose bracing pack for you to fit yourself, or we can install them for you. If you elect for us to install them you can let us know which orientation you would like them fitted in, left side or right side to the top.

Glass Opening

We can also manufacture your door with a glazing opening. Selecting this option will mean we create a glazing aperture to the top of the door, and supply the door with pine glazing bead. We do not supply the glass.

If you would like a particular size glass opening then please let us know, otherwise we will normally make the opening to be a large central aperture in the upper panel


We do not currently offer a prefinishing option for pine doors. When finishing your door you will need to give the door a light sanding and apply knotting solution to knots to prevent sap bleeding through.

The door is then ready for painting or varnishing



Doors are carefully packaged before being shipped with a national courier.

For smaller orders, each door is wrapped in a sturdy cardboard carton and shipped individually. Larger orders (typically 12-15 doors+ will be palletised)


There are no reviews yet.

Be the first to review “Pine Ledged External Doors”