- No products in the cart.
- No products in the cart.
UK MADE
MADE TO MEASURE
FAST LEAD TIMES
PEFC REGISTERED
DELIVERY DAYS TO SUIT YOU
Description
Most newer homes are fitted with softwood or MDF stairs, and the cost and mess involved in replacing them can be off putting. Luckily, we have our bullnose bottom step as part of our Heritage Stair Cladding Range. Our kits make it quick and easy to refurbish your stairs.
How does it work?
Heritage oak stair cladding offers you a simple cost-effective solution. By retaining your existing stairs, and bonding new oak treads and risers over the top, converting your staircase to solid oak becomes an easy weekend DIY job and better yet the cost is usually a fraction that of a new oak staircase.
This pack is designed to clad a bullnose opening step. Therefore, the pack will clad any bullnose step up to 1150mm wide, 285mm deep and up to 200mm high.
Each Bullnose Bottom Step Pack Contains:
- 2 Piece Tread, 14mm solid oak with Tongue and Groove jointing, curved to one end
- Oak Riser Moulding Kit; 2 x straight sections, 1 x curved section
- Oak Veneered Curved Riser Board
We hold the bullnose bottom step tread packs in stock so they can be with you almost immediately! Our specialist staff box each bullnose kit individually for protection purposes, both in storage and in transit. We aim to get the items to you in 2-3 working days.
Delivery
We use DX delivery to deliver these items. We will call you when your order is ready to arrange a delivery date that suits you.
Additional information
| Weight | 4.8 kg |
|---|---|
| Dimensions | 125 × 40 × 40 cm |
Timber Grades
Stair cladding is designed to fit stairs with straight treads up to 1000mm wide when measured between the strings.
Tread depths (know as the "go" of the tread) of up to 285mm can be accommodated
Step heights (know as the "rise" of the step) of up to 200mm can be accommodated
All of these dimensions are well above what is normal for UK stairs. A typical UK staircase will have a width of around 840mm between treads, a rise of around 180mm and a going of around 220mm. Made from selected pieces of oak with less knots than our rustic grade. Some pieces will be clear whilst others will have some knots.
Standard and Custom Sizes
Stair cladding is designed to fit stairs with straight treads up to 1000mm wide when measured between the strings. Bullnose steps are typically up to 100mm wider. The bullnose kit will fit bullnose steps up to around 1185mm wide
Tread depths (know as the "go" of the tread) of up to 285mm can be accommodated
Step heights (know as the "rise" of the step) of up to 200mm can be accommodated
All of these dimensions are well above what is normal for UK stairs.
Note: the bullnose kit is designed for single bullnose steps. These are steps with a single curved end. Steps with curved on either end are occasionally found, and these can be clad but will require 2 kits, and a string veneer. Please call for further details.
The kit is not designed to fit a "curtail" step. These are rare steps where the curved end runs through 180 degrees, not the 90 degrees of a bullnose step. A bullnose step can be seen in the main (first) product image on this page
Finishing
Oak stair cladding is supplied unfinished to allow you to match into your existing decor. We can supply finishes from our flooring finishing range if desired.
Delivery
We use multiple couriers to ensure your item is delivered safely and efficiently, lead times are as below
Please note, anything to Scotland, Cornwall, or the South Coast can take up to 4 weeks in transit. Please call us for an approximate lead time as time will be dependent on the quantity of items you purchase
Handling Time
1-3 Working Days
Transit Time
3-5 Working Days
We do not currently deliver to Scottish Highlands, Islands, or Ireland
You must be logged in to post a review.
Bullnose Tread Pack
£180.18 Incl. VAT
Oak stairs are hugely popular, with the natural subtle tones of oak treads adding a real wow factor to your home.
Oak stair cladding is the most cost effective way to achieve an oak staircase. Keep your existing stairs and simply bond new oak treads and risers over the top of the existing ones
The bullnose bottom step can be recognised by its curved end. This kit contains the parts required to clad one step, and is universal for either a left or right hand step
Related products
Winder Tread Pack
£105.60 Incl. VATOak String Veneer
£41.58 Incl. VATExtension Board
£18.54 Incl. VATCladding Adhesive Kit – Pack of 4 Tubes
£25.03 Incl. VAT
Reviews
There are no reviews yet.