Osmo Polyx Oil Original

Product description: Clear, satin-matt (3032) or matt wood finish (3062), which combines all the advantages of oils and waxes in one unique product. Osmo Polyx®-Oil is resistant to water and dirt, is very durable and smoothens wood surfaces. In comparison to conventional finishes, the natural vegetable oils and waxes allow for an even colouring and a harmonic, smooth surface result.

Easy application – no need for a primer or sanding between coats – saves time and money. It meets the wood's natural demands: It is microporous and does not crack, flake, peel or blister. Resistant against wine, beer, cola, coffee, tea, fruit juice, milk and water in accordance with DIN 68861-1A (German industrial norm). When dry, the finish is safe for humans, animals and plants (suitable for children's toys as per. EN 71.3 (European norm) and fast to perspiration and saliva in accordance with. DIN 53160 (German industrial norm)).

Recommended use: Ideal for all wooden floors, solid or plank wood, strip parquet, OSB or cork
flooring. Highly recommended for wooden furniture. Also for slate and screed as well as
terracotta and other natural (non-glazed) ceramic tiles.

Preparation: Wood surface must be clean and dry (moisture content max. 20%). Polyx®-Oil is
ready to use, please do no thin, stir well before use. Clean or slightly sand old microporous finishes, remove old varnish (Osmo Paint Remover or by sanding). Small cracks, larger dents and small holes in the wood can be filled Osmo Woodfiller.
Sand carefully before application starting with a coarse paper – final sanding for flooring P100- 150, furniture P180-240. Remove dust etc. thoroughly from the surface before application (vacuum cleaner).
Application:
Apply thinly and evenly along the wood grain with either an Osmo Hand Brush, the Osmo 220 mm Floor brush or the Osmo Microfibre Roller, and spread well. Allow for good ventilation whilst drying. Apply a second coat as before. For the renovation of oiled/waxed surfaces, generally only 1 coat is required. This should be applied to a clean and dry surface.
The final surface quality is dependent on the wood's surface structure, we therefore always recommend to test the product on a small sample area before complete application. Cleaning of tools: Clean working utensils with Osmo Brush Cleaner (benzene-free).
Drying time: approx. 8-10 hours (normal climatic conditions, 23°C/50%, rel. humidity). Lower temperatures and/or high humidity can increase the drying time. Note: Natural oils accentuate the natural colour tone and grain of wood (permanent wet look). A dry Osmo Microfibre Roller can be used, if necessary, to roll out brush marks within 30 min of
application. Cork flooring is highly porous and requires an especially thin application, as a result the drying
time is increased (min. 24 hours per coat).
Caution: For cupboards, wardrobes and drawers, only 1 thin coat should be applied with a cloth. Floors finished with Osmo finishes are easy to clean, remove loose dirt with a soft brush or vacuum cleaner. Damp mopping is easy with Osmo Wash and Care, simply add to warm water (slightly moist mop only).
Osmo Liquid Wax Cleaner can be used for refreshing the floor surface as required. If a higher
level of sheen is desired, and after cleaning and thorough drying, apply the Liquid Wax Cleaner
thinly and polish when dry.
Warning: Wash out any used cloth impregnated with this product immediately after use or store in an airtight container (danger of self-ignition). The dry finish fulfils fire classification B2 according to DIN 4102.
Safety data sheet available for professional user on request.

Colour tone: Clear satin-matt or matt

Can sizes: 0.375 L, 0.75 L , 2.5 L, 10 L, 25 L

Coverage: 1 L = approx. 24 m²

Storage: Shelf life is 5 years or more if can is tightly closed. Store in a dry place. If thickened by
frost it will regain a normal consistency under normal temperatures within 24-36 hours.

Ingredients: Based on natural vegetable oils and waxes (sunflower-oil, soyabean-oil, thistle-oil, carnauba-wax, candelilla-wax), paraffine, siccatives (drying agents) and additives. Disaromatised white spirit (benzene-free). This product fulfils EU-Regulation (2004/42/EC) according to the VOC limit value of max. 500 g/l (Cat. A/e (2010). Detailed declaration of ingredients available upon request

Technical data:
Specific gravity: 0,88-0,95 g/cm³
Viscosity: 140-180 mPas
Odour: low/mild, odourless after drying
Flashpoint: ≥ 60°C according to DIN 53213